Sand making machine in the operation process and steps of science

Sand making machine , operating procedures and steps are: 1) open system sand machine (sand making machine) before check the vortex chamber observe whether door is shut, to prevent the material from the vortex chamber to observe rushed out of the door, produce risk. (2) check the system sand machine impeller direction of rotation, from the mouth direction. Impeller should be counterclockwise rotation, otherwise the motor wiring should be adjusted. (3) the sand making machine and conveyor equipment startup sequence is: discharge to crusher, feeding. Crusher must be started light, wait for after crusher operating normally, feeding direction; In contrast to the boot order stop order. (4) the Sand making machine into the material particles in strict accordance with the specified requirements, is greater than the specified material into the crusher is forbidden, otherwise, will cause the impeller imbalance and excessive wear of impeller base to jam impeller passage and center into the feed tube, make the crusher can not work normally, found a large piece of material should be ruled out in time. 5. Sand making machine stop moving, should stop feeding in time, otherwise, will cause the crushing impeller, burning motor. 6. Sand making machine feeding strive to continuous uniform. All landowners system sand machine operation process, can not have violent vibration and abnormal noise, otherwise, should stop it for checking. End system sand machine lubrication, lubrication for dry oil lubricating way, using mobil automotive embellish lipid super, add quantity for 1/2 - two-thirds of the bearing cavity, crusher each work, add right amount of grease, after working several class, open the main bearing of main bearing cleaning, replacement of bearing when necessary. http://www.quarrycrusher.cn/product/b-deep-rotor-impact-crusher.html