Raymond duct blockage Causes

Raymond mill in specific production use, circulation duct occasionally clogging, which is to be shut down promptly remove material and check the cause of duct blockage, can continue to be material mill production after overhaul. The main factors that led to its failure appear, allowing you to find the right cause of the disease. Below we explain SBM machine on the following three points under blockage causes. 1, Raymond baghouse not functioning also cause Raymond duct blockage Bag filter is mainly used in the recovery cycle air volume increased airflow while removing dust particles in the air flow, will increase the amount of purified exhaust air from the plane, when the baghouse dust can not be normal operation, a lot of dust particulate material easily accumulation in the duct is formed, so as to cause Raymond circulation duct blockage. Therefore, to promptly stop to check baghouse role in ensuring the normal operation of the bag filter. 2, the fan power shortage due to insufficient air flow generated is normal material flow in the duct can also cause material accumulation phenomenon. Material under the action of the blower along the circulation duct for transmission, so to maintain the normal operation of the blower, the blower can not appear the wind is too small to transmit the motion of the material in the overhaul to keep Raymond rated working voltage of the normal use of power and in order to maintain a stable and lasting work of production equipment. 3, Raymond feed inequality is a major factor causing circulation duct blockage Too little will cause too much material Raymond grinding insufficient, finished powder can not be in effect along the circulation duct blower discharge, increased workload blower, resulting in the accumulation of powdered materials generated in the duct, eventually leading to the air duct blocked. Therefore, to ensure that when Raymond feeding feeding continuous and uniform, to avoid air duct clogging.